Abbey 18 | Brewday

IDEA

According to the BJCP (1), the Trappist Single is:

“A pale, bitter, highly attenuated and well carbonated Trappist ale, showing a fruity-spicy Trappist yeast character, a spicy-floral hop profile, and a soft, supportive grainy-sweet malt palate.”

As it’s so common on my blog, I never actually brewed a Trappist single before, but I had my fair share of belgian beers. Based on my experiences with belgian beers and the description provided by the BJCP, I created a recipe and started brewing a few days later.


Recipe

Stats:

  • Est. OG: 1.042

  • Est. FG: 1.005

  • ABV 4.9%

  • Color: 4.9 SRM

  • IBU: 32.4

  • Est. Brewhouse Efficiency: 70%

  • Boil-Time: 30 minutes

  • Water Profile: Westvleteren

Name Temperature (Metric) Temperature (US) Time (minute)
Protein Rest 55℃ 131°F 20
β-amylase Rest 64℃ 147.2°F 30
α-amylase Rest 72℃ 161.6°F 30
Mash Out 75.6℃ 168.08℉ 10
Boil 100℃ 212℉ 30
Name Weight (Metric) Weight (US) Percentage
Dingemans - Pilsen MD 3.1 kg 6.83 lb 81.6%
Simpsons - Dextrin Malt (carapils) 0.3 kg 0.66 lb 7.9%
Dingemans - Biscuit 0.2 kg 0.44 lb 5.3%
Clear Candi Sugar 0.2 kg 0.44 lb 5.3%
Name Weight (Metric) Weight (US) IBU Alpha Acid Time (minute)
Saaz 18g 0.63 oz 6.7 3.6% 30
Perle 18g 0.63 oz 13.4 7.2% 30
Saaz 15 0.53 oz 2.6 3.6% 10
Perle 15 0.53 oz 5.3 7.2% 10
Saaz 15 0.53 oz 1.5 3.6% 5
Perle 15 0.53 oz 2.9 7.2% 5
Name Producer Type Style Dry Alternatives Liquid Alternatives
YF-204 Priest D'vill Yeastflow Liquid Abbey Ale SafAle T-58 WY1214 Belgian Abbey Style Ale
GY014 Belgian Abbey Ale
WLP500 Monastery Ale
B63 Monastic
Strike Water (Metric) Strike Water (US) Sparge Water (Metric) Sparge Water (US) Ca Mg Na SO4 Cl HCO3
14.4L 3.8 gal 12.35L 3.26 gal 114 ppm 10 ppm 125 ppm 145 ppm 139 ppm 370 ppm
Name Weight (Metric) Weight (US) Time (minute)
Yeast Nutrient 1g 0.04 oz 15
L-Ascorbic Acid 3g 0.11 oz Strike Water before mash
Supermoss 4g 0.14 oz 15

Brewday

In the morning I crushed the malts, as I already collected the RO water the day before.

While stirring the water, I added the crushed malts. As the water was only 55℃ (131°F) hot, the mash looked a bit thicker than usual.

Ten minutes into the mash, I checked the pH of the wort. The value was too high, so I added 3.5ml of 80% lactic acid to the mash.

This small amount of lactic acid brought the ph down to 5.32.

Before the end of the mash, I checked if any starches were left in the wort. The test was negative, indicating that the mash was finished. After this, I continued with the mash out and sparging. While heating up the wort for boil, I measured the pre-boil gravity. The measured gravity was 0.003 points higher than expected.

Before the wort reached boiling temperature, I prepared the hops additions.

I boiled for 30 minutes and added the hops at the above stated times.

After the wort was chilled down to 23.2℃ (73.76℉), I measured the original gravity. The OG was 1.046, 0.004 points higher than expected.

The final gravity came out at 1.007.


Tasting

First week: The beer had a pleasant smell, with light bready, floral, citrusy and distinct Trappist yeast notes. In its taste, the beer carried the same notes, supplemented with a medium-light body. This resulted in a fairly complex, but highly drinkable, beer.

Later on: With time, the hop flavor faded, letting the malt and yeast shine.


Conclusion

The beer was fairly complex, but still a very nice session beer. As the hop flavor faded, the yeast and the malt started to really shine. It would be interesting to see how this beer fairs, if bottle conditioned, as is traditional. Also, using some new world hops could bring an interesting twist to this style.


Resources

  1. BJCP Guidelines